14 Deterrence Light Settings
Set the warning light and dual warning light settings to help increase visibility around your surveillance area and alert
everyone of your camera’s presence, while also enhancing the camera’s image at night.
14.1 Configuring Warning Light
Set preferences for warning light on compatible Lorex deterrence cameras. For a complete list of compatible cameras, navigate
to your recorder series at
lorex.com/compatibility
.
To configure warning light:
-
From the Live View display, right-click to open the Quick Menu, then click Main Menu.
-
Click Events, then Event Settings. Click the Light tab from the side panel, then the Warning Light tab on the top panel.
-
Select a camera to configure warning light.
-
Enter how long the warning light will stay on after a motion detection event.
-
Select Always On for a solid white light, or Flicker for a flashing light. If you select Flicker, set how quickly the light will flash under Flicker Frequency.
-
Click Apply to save changes.
14.2 Configuring Dual Warning Light
Set preferences for dual warning light on compatible Lorex deterrence cameras. For a complete list of compatible cameras,
navigate to your recorder series at
lorex.com/compatibility
.
To configure warning light:
-
From the Live View display, right-click to open the Quick Menu, then click Main Menu.
-
Click Events, then Event Settings. Click the Light tab from the side panel, then the White/Blue Light tab on the top panel.
-
Select a camera to configure dual warning light.
-
Enter how long the dual warning light will stay on after a motion detection event.
-
Select White Always On or Blue Always On for a solid white light or for a flashing light select between White Blue Flicker, White Flicker, or Blue Flicker. If you select a flicker light, set how quickly the light will flash under Flicker Frequency.
-
Click Apply to save changes.